Skip to Content
  1. All products
  2. Shop by system
  3. BEKA Manual Push fill Grease Gun for EP-1 & Pico (Standard 400g)
  4. Shop by system
Pricelist: Website Zero Price Pricelist
Pricelist: Website Zero Price Pricelist

BEKA Manual Push fill Grease Gun for EP-1 & Pico (Standard 400g)

(0 review)

A hand-operated push-fill gun for transferring grease from a standard 400 g cartridge into progressive pumps and centralised lubrication systems.

$ 120.23 $ 120.23 (Tax excluded)
$ 120.23 (Tax excluded)

  • Manufacturer
  • Used On
Add to cart
Buy now
Terms of Trade
NZ Shipping: 1-3 Business Days
Shipped from Christchurch, New Zealand
Contact Us
Manufacturer: BEKA
Used On: Multi-Systems

Internal Reference: 10125287

Key specifications

Specification

Value

SKU

10125287

Product type

Manual grease filling gun

Operation

Hand-operated push fill

Cartridge size

Standard 400g

Material

Steel

Intended use

Refilling progressive pumps and centralised lubrication-system reservoirs

Connection requirement

Compatible push-fill connection

Description 

Designed for clean, controlled reservoir filling in the workshop or field, this sturdy steel push-fill gun transfers grease directly from a standard 400g cartridge into a progressive pump or centralised lubrication system. It is a practical addition to a service vehicle or maintenance kit and requires no separate bulk-grease pail.

Filling through the system's filling connection means the reservoir does not need to be opened, helping protect the grease supply from dirt and contamination. The gun can accept any grease brand supplied in the correct 400g cartridge format, although the grease itself must meet the requirements of the pump, lubrication system and machine.

Grease filling process

Contaminated grease can damage bearings and cause lubrication-system problems. This filling gun transfers grease through the system's filling connection without opening the reservoir, helping keep dirt and dust out during routine refilling.

1. Confirm that the 400 g cartridge contains the correct grease for the machine and lubrication system.
2. Unscrew the filling cylinder, insert the grease-filled cartridge and refit the cylinder.
3. Clean the gun connection and the filling point on the lubrication pump.
4. Connect the gun to the pump's compatible filling connection. Depending on the system, this may be a plug-in or threaded connection in a straight or 90-degree configuration.
5. Press down the piston rod to transfer grease from the cartridge into the pump reservoir.
6. Retract the piston rod. When the cartridge is empty, remove it and fit another cartridge if more grease is required.

7. Stop at the reservoir level specified in the pump manual. Do not overfill the reservoir.